Instructions:

1. Before gluing the batting and fabric, sand, stain and varnish the exposed pieces. Both sides of the outer ring and the underneath side of the octagon base and base circle will need finish, along with the pedestal base and legs.

2. Glue the batting and fabric onto the chip tray areas of the octagon base using 3M Spray Adhesive. I used the same technique used in Ryan’s Poker Table plan, and it worked well. Place a template over the areas to be sprayed to keep the adhesive off of the other areas of the table.

3. Glue the batting and fabric onto the center circle. Once the fabric is glued, staple the fabric onto the underside of the circle.